Monolithic and Fabricated Glass
Monolithic glass is the building block to a world of architectural and aesthetic options. The uses of monolithic glass alone are limited. However, we take advantage of monolithic glass’ versatility and offer advanced fabricating and machining techniques. This presents a wide range of possibilities for customized design and construction. Fabrication brings out the full potential of monolithic glass.
With our state-of-the-art machinery and equipment, we’ve made fabricating an easy and efficient process that can accommodate your requests with a number of options to choose from. PRESS GLASS is your one-stop-shop to maximize the potential of monolithic glass with the highest quality of service. Our fabricated glass options include cutting, drilling and edgework for construction uses; while our spandrel and digital print options are ideal for aesthetic designs.
Among all the types of glass offered there is a need for monolithic glass. PRESS GLASS offers monolithic glass that is cut to the required dimensions for the following types: float glass, low-iron or tinted glass, reflective and hard-coated, as well as laminated. Monolithic glass is offered as the most basic product without any additional machining, heat treating, etc.
Our market offering concerning monolithic glass that is machined can be found in the following section:
Market offering
The range of offered monolithic glass covers:
| Product Offer | Glass thickness |
Maximum Dimensions |
Minimum Dimensions |
Maximum Weight |
| Ground/ Polished | 3/16” – 3/4” | 126” x 236” |
10” x 14” |
2,008 lb. |
| Drilled/ Milled | 3/16” – 3/4” | 126” x 236” | 4” x 12” | 2,008 lb. |
| Fully Tempered | 3/16” 1/4”- 3/4” |
110” x 236” 126” x 236” |
10” x 14” | 2,008 lb. |
| Heat Strengthened | 3/16” 1/4” – 3/8” |
110” x 236” 126” x 236” |
10” x 14” | 1,057 lb. |
| Laminated | 3/16” – 3/4” | 126” x 236” | 5” x 19” |
4,400 lb. |
| Spandrel | 3/16” – 3/4” | 102” x 236” | 10” x 14” | 1,102 lb. |
| Printed | 3/16” 1/4” – 3/4” |
110” x 236” 126” x 236” |
7” x 12” | 1,102 lb. |
| Heat Soak Tested | 3/16” 1/4” – 3/4” |
110” x 236” 126” x 236” |
10” x 18” | 2,008 lb. |
All-Glass Systems
In addition to a myriad of fabricating options, our monolithic glass can also be utilized in our All-Glass Systems. Heat treated single panes of glass
or laminated glass are customized to your interior and exterior needs in an aesthetic and unobtrusive package that ensures safety, strength, and quality.
Glass for Handrail Systems
Glass merges transparency and safety into one package. High quality monolithic and laminated glass handrail systems enhance the beauty of a project while simultaneously reducing risk with strong and reliable glass panels. We make seamless and aesthetic protection for interior/exterior stairwells, balconies and open-air spaces.
All-Glass Entrance Systems
We offer complete all-glass entrance systems, which include sliding and swinging doors, sidelites, and glass partitions. These door systems can be provided with your choice of panic hardware, locking or non-locking pulls, closers, locks, and rails or channels for sidelites. All systems are produced in either monolithic or laminated glass with various hardware finish options.
Structural Systems
Our laminated glass canopies and walls utilize point-supported hardware. This ensures stability, protection, and support for visual innovation and flexibility.
We contribute to activities supporting environmental protection that are now in excess of the requirements of law in number of countries
